The Y-20 Splitter Assembly Cable Connector is a customized type 2 3 4 way branch cable out splitter connector, the main side connector is crimp in type connector, you just need crimp in the wire on the connector, on the branch side cable you can choose a assembly connector and you need to install by yourself, or an connector with cable we can solder the wire with you.

When you are connected to the shunt lines, please follow these steps:

DETERMINE POWER DEMAND: First, work out the total power demand of the equipment that you want to connect to the shunt.Make sure that the shunt can provide enough power for all of the equipment.

PLUG INTO OUTLET: Plug the shunt's plug into a power outlet.Make sure that the plug is inserted properly and that there is no looseness or poor contact.

CONNECTING EQUIPMENT: Connect the equipment to the socket of the shunt.Based on the equipment's power needs and the number of sockets on the shunt, decide on the best order to connect the equipment.

Avoid overloading: Make sure you do not exceed the shunt's power rating.If the connected equipment is too heavy for the shunt, it will cause an overload and may result in equipment failure or power interruption.

Periodic inspection: Check the shunt and connected equipment regularly for anything loose, damaged or unusual.If you find any problems, fix or replace them straight away.Please note that you must be very careful when making any power connections or shunt line lapping operations and make sure that you know the relevant safety practices.If you are not sure how to do something or if you have any problems, ask a professional or electrical technician for advice.