AOHUA Customized M14 Connector 2PIN 6A Power Electrical Cable Connector IP658 Waterproof

This image depicts a set of lighting system components typically employed in industrial/commercial illumination applications (such as shelving lights, display cabinet lights, etc.). The functional elements can be broken down as follows:

• Control module (circuit board within the white box in the top-left corner): Responsible for power supply, switching, or dimming control of this lighting system.
• Power plug (bottom-left corner): Connects to mains electricity to supply power to the entire system.
• Lighting fixtures (the two elongated devices in the diagram): The actual light-emitting sources (appearing to be LED lights).
• Connecting accessories (black plugs, T-shaped splitters, etc.): Used to establish series/parallel networks between the power supply, control module, and luminaires, enabling centralised power supply and control for multiple fixtures.

Step 1: Connecting the Power Supply to the Control Module

             Insert the power supply plug cable from the bottom-left corner into the corresponding port on the control module inside the white box at the top-left corner (note the plug compatibility).

Step 2: Extending the Circuit (Using a Splitter)

             Connect the cable extending from the control module to the main port of the black T-shaped splitter to branch the circuit.

Step 3: Connecting the lighting fixtures

            Insert the connection cables from the two elongated LED lighting fixtures into the respective branch ports of the splitter.
Should additional fixtures be required, further expansion can be achieved using supplementary splitters (the splitter on the right in the diagram is intended for multi-fixture networking).

Step 4: Power-up Test

            Insert the power plug into a mains socket and verify all luminaires illuminate correctly.
(Note: During installation, observe the anti-reverse design of connectors to prevent incorrect insertion. If dimming functionality is present, confirm the control module's operating protocol.)
This completes the basic assembly of a multi-luminaire lighting system.

Connector Specification:

Items                   Specification

Name                    M14

PIN Number           2PIN

Current Rating        6A

Operating Rating     -20℃——80℃

Waterproof Level     IP65